PSCE - Centurion Tower 1000VA, 2000VA or 3000VA - Double Conversion True Online

PSCE - Centurion Tower 1000VA, 2000VA or 3000VA - Double Conversion True Online

PowerShield SKU: PSCE1000

$1,445.99 NZD

Shipping calculated at checkout

Item is available to order. Please note the estimated delivery times below (If not displayed please contact us). Please call to pre-arrange any pick-ups.

Please Note: Estimated delivery details below

Features Specs - PSCE1000 Specs - PSCE2000 Specs - PSCE3000

Includes:

  • True Online Double Conversion
  • Wide input voltage range (110-300 VAC)
  • Input power factor correction 0.98
  • 50Hz/ 60Hz frequency converter mode
  • Programmable power outlets
  • Emergency power off function (EPO)
  • Optional Eco-mode operation for energy saving
  • Generator compatible
  • Backup time for all models is easily extended by simply plugging additional battery banks
  • Charger capacity expansion to 9A for long-run models
  • USB, RS232, SNMP and AS400 multiple communications available
  • External maintenance bypass available for all models
  • N + X parallel redundancy available for 6K/ 10K models (available on request)
  • Monitoring and Shutdown Software included

PowerShield Centurion Tower 1000VA/ 800W or 2000VA/ 1800W or 3000VA/ 2400W Double Conversion True Online UPS. PSCE1000 - 2x NZ Outlets + 2x IEC Outlets. EBM Compatible for Extended Runtime, Programmable Power Outlets.

PSCE200 -  4x NZ Outlets + 2x IEC Outlets. 

PSCE3000 - 4x NZ Outlets + 1x IEC Outlets. EBM Compatible for Extended Runtime, Programmable Power Outlets.

The Centurion is designed to protect the critical computer, communications, industrial, medical and other mission critical equipment. A true online double conversion UPS, the Centurion is designed to guarantee trouble-free operation of protected equipment in any harsh electrical environment. Versatile management and hardware options offer the flexibility to build up a power protection solution to fit any application. This range now comes with two sets of sockets on the back, one row of output sockets are programmable meaning that you can shed less important loads. This will leave additional valuable backup time to the equipment that is most critical. This UPSp includes a stylish, informative LCD display



PSCE1000

INPUT
Voltage Range Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5%
(based on load percentage 100% - 80% / 80% - 70%
/ 70% - 60% / 60% - 0%)
Low Line Comeback  175 VAC ± 5%
High Line Transfer 300 VAC ± 5%
High Line Comeback 47.5Hz ~ 52.5Hz or 57Hz ~ 63Hz
Frequency Range 47.5Hz ~ 52.5Hz or 57Hz ~ 63Hz
Phase Single phase with ground
Power Factor 0.98

OUTPUT
AC Voltage Regulation (Batt. Mode)  ± 3%
Frequency Range (Synchronized Range   48Hz ~ 52Hz or 57Hz ~ 63Hz
Frequency Range (Batt. Mode) 50Hz ± 0.25Hz or 60Hz ± 0.3Hz
Load Crest Factor 3:1
Harmonic Distortion 3% THD (Linear Load)  6% THD (Non-linear Load)
Transfer AC Mode to Batt. Mode  Zero
Inverter to Bypass 4ms (Typical)
Waveform (Batt. Mode) Pure Sinewave

EFFICIENCY
ECO Mode 85%
Battery Mode 83%

BATTERY
Battery Type 12Vx9AH(x3)
Typical Recharge Time 4 Hours to Recover to 90% Capacity
Charging Time (Max.) 1.0A
Charging Voltage 41.0 VDC ± 1%

PROTECTION
Full Protection Overload, discharge, thermal, short circuit and overcharge protection

COMMUNICATIONS & MANAGEMENT
Interface USB or RS232 as standard, Intelligent slot for PSSNMP
or PSA400 dry contact
Software

Power Shield NetGuard Software - supports Windows based operating Systems, Linux, Unix & Mac
LCD Display / Alarm UPS Status, Load Level, Battery Level, Input/Output Voltage,
Battery Time Remaining and Fault Indicators
Audible Alarm Battery Mode, Low Battery, Overload, Fault

PHYSICAL
Dimension (D x W x H) 396 x 145 x 240mm
Weight 14kg

OPERATING ENVIRONMENT
Temperature 0°C - 40°C
Humidity 20-90% (RH Non-condensing)
Noise Level Less than 45dBA @ 1 Meter

COMPLIANCE
Safety EN62040-1-1 2003, IEC60950-1-1
EMS EN62040-2 2006

 



PSCE2000

 

INPUT  
Voltage Range    Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 %
(based on load percentage 100% - 80% / 80% - 70%
/ 70% - 60% / 60% - 0%)
Low Line Comeback  175 VAC ± 5%
High Line Transfer 300 VAC ± 5%
High Line Comeback  47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
Frequency Range  47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
Phase  Single Phase with Ground
Power Factor  0.98

OUTPUT  
AC Voltage Regulation
(Batt. Mode) 		 ± 3%
Frequency Range
(Synchronized Range) 		 48Hz ~ 52Hz or 57Hz ~ 63Hz
Frequency Range
(Batt. Mode) 		 50Hz ± 0.25Hz or 60Hz ± 0.3Hz
Load Crest Factor  3:1
Harmonic Distortion  4% THD (Linear Load)
7% THD (Non-linear Load)
Transfer  AC Mode to Batt. Mode  Zero
Inverter to Bypass 4ms (Typical)
Waveform (Batt. Mode) Pure Sinewave

EFFICIENCY
ECO Mode 88%
Battery Mode 83%
BATTERY
Battery Type 12Vx9AH(x6)
Typical Recharge Time 4 hours recover to 90% capacity
Charging Current (max.) 1.0A
Charging Voltage 82.1 VDC ±1%

PROTECTION
Full Protection Overload, discharge, thermal,
short circuit and overcharge protection

COMMUNICATIONS & MANAGEMENT
Interface USB or RS232 as standard,
Intelligent slot for PSSNMP or
PSAS400 dry contact
Software Power Shield NetGuard Software -
supports Windows based operating Systems,
Linux, Unix & Mac
LCD Display / Alarm UPS Status, Load Level, Battery Level,
Input/Output Voltage, Battery Time
Remaining and Fault Indicators
Audible Alarm Battery Mode, Low Battery, Overload, Fault

PHYSICAL
Dimension (D x W x H) 425 x 190 x 335mm
Weight 26kg

OPERATING ENVIRONMENT
Temperature 0°C - 40°C
Humidity 20% - 90% (RH Non-Condensing)
Noise Level Less than 45dBA @ 1 Meter

COMPLIANCE
Safety EN62040-1-1 2003, IEC60950-1-1
EMS EN62040-2 2006
RoHS Directive 2001 / 65 / EU




PSCE3000

 

INPUT
Voltage Range Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5%
(based on load percentage 100% - 80% / 80% - 70%
/ 70% - 60% / 60% - 0%)
Low Line Comeback  175 VAC ± 5%
High Line Transfer 300 VAC ± 5%
High Line Comeback 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
Frequency Range 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz
Phase Single phase with ground
Power Factor 0.98

OUTPUT
AC Voltage Regulation (Batt. Mode)  ± 3%
Frequency Range (Synchronized Range   48Hz ~ 52Hz or 57Hz ~ 63Hz
Frequency Range (Batt. Mode) 50Hz ± 0.25Hz or 60Hz ± 0.3Hz
Load Crest Factor 3:1
Harmonic Distortion

4% THD (Linear Load)  

7% THD (Non-linear Load)
Transfer AC Mode to Batt. Mode  Zero
Inverter to Bypass 4ms (Typical)
Waveform (Batt. Mode) Pure Sinewave

EFFICIENCY
ECO Mode 88%
Battery Mode 83%

BATTERY
Battery Type 12Vx9AH (x6)
Typical Recharge Time 4 Hours to Recover to 90% Capacity
Charging Time (Max.) 1.0A
Charging Voltage 82.1 VDC ± 1%

PROTECTION
Full Protection Overload, discharge, thermal, short circuit
and overcharge protection

COMMUNICATIONS & MANAGEMENT
Interface USB or RS232 as standard, Intelligent slot for PSSNMP
or PSA400 dry contact
Software Power Shield NetGuard Software - supports
Windows based operating Systems, Linux, Unix & Mac
LCD Display / Alarm UPS Status, Load Level, Battery Level, Input/Output Voltage,
Battery Time Remaining and Fault Indicators
Audible Alarm Battery Mode, Low Battery, Overload, Fault

PHYSICAL
Dimension (D x W x H) 425 x 190 x 335mm
Weight 28kg

OPERATING ENVIRONMENT
Temperature 0°C - 40°C
Humidity 20-90% (RH Non-condensing)
Noise Level Less than 45dBA @ 1 Meter

COMPLIANCE
Safety EN62040-1-1 2003, IEC60950-1-1
EMS EN62040-2 2006
RoHS Directive 2001 / 65 / EU



PDFs

alliance wholesale prduct range

Newsletter

Sign up to receive the latest information