Model No: RAK-4T
|Input Supply||200-260V AC 50/60Hz 10A Type B MCB protection required|
|Housing||Powder coated galvanised stee|
|Climate Range||Temperature +2C to +40C
Humidity +5% - 90% non condensing
|Connections||3 way screw terminal for mains supply
5 way screw terminal for load outputs
2 RJ45 sockets for Rak-Link or RxLink connection.
|Protection||Auto resetting over current protection
Auto thermal shutdown
Voltage surge protection
|Load Types||Incandescent mains voltage lamps
Tungsten halogen GU10 lamps
Trailing edge dimmable LV transformers
Mains dimmable LEDs
S terminal for fans & other non dimmed switched loads
|Minimum Load||4w per Channel|
|Maximum Load||Total box load - 10A, 2.4kw/2.0kva
Maximum load over 1+2 or 3+4 - 1.5kw
|Terminal Sizes||2.5mm2 - Stranded
4.0mm2 - Solid
|Cable Entry||10x 20mm top and bottom|
|Standards||Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
|Memory||Flash memory (non volatile)|
A four channel dimming rack with dimming channels that can control a total of 2400w/2000va of trailing edge dimmable lighting loads. In parallel with the 4 dimmer channel is a separate switched relay channel for LEDs or Fans or other non dimmed loads.
RAK-4T dimmer units can be used as simple 4 channel packs or joined to form multi-way stacks of 8, 12 and 16 channels using the wireless RxLink receiver or up to 32 channel stacks using the wired system with a RAKLINK.
Programmed using RASOFT Pro software, the unit can be used seamlessly with other Rako modules such as RML and RMT in-line dimmers and controlled from RCM & WCM keypads, remotes, tablets and smartphone apps.