Alliance Wholesale

Volt Free Contact to RACOM Radio Interface Unit - RAVFR

Login to View Prices

> The RAVFR is a volt-free contact closure to RF interface to convert relay and PIR signals to Rakom RF. It creates a link between volt-free relay, switch or PIR sensor outputs and Rako RF based receivers. The unit accepts 7 contact closures for scenes 1-4, off, raise and lower. When connected to a PIR sensor, the unit can be configured to enable and disable the PIR using an RCP RF wall plate or RAMB1 timeclock.

> Needs 12V DC Supply or RAPSU

Description

Details

Model No: RAVFR

Dimensions 160x50x36mm
Input Supply 12V DC regulated (RAPSU or equiv.)
Weight 125g
Housing UL V0 material
Climate Range Temperature +2C to +40C Humidity +5% to 95% non condensing
Connections 2 way screw terminal for power supply
8 way screw terminal for volt-free contact closure inputs
Terminal Sizes 2.5mm2 for power supply
1.0mm2 for contact closure inputs
Standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
LVD - EN 60950-1 :1992
Communication Rakom coded fm radio, 433.9MHz
Memory Flash memory (non volatile)

DESCRIPTION
The RAVFR creates a link between volt-free relay, switch or PIR sensor outputs and Rako RF based receivers.

The unit accepts 7 contact closures for scenes 1-4, off, raise and lower.

When connected to a PIR sensor, the unit can be configured to enable and disable the PIR using an RCP RF wall plate or TCM timeclock module.

Additional

Additional Information

Manufacturer Rako

Support

-