Alliance Wholesale

Wired Mains Input interface - WAVMI

Login to View Prices

> The WAVMI is Interface unit for connecting up to 5 mains switching signals from devices such as PIR sensors to the Rako Rakom wired network.

Description

Details

Model No: WAVMI

Dimensions 190x100x65mm
Input Supply Powered from RAK-LINK via RJ11 connection or from CAT5 network via optional punch down connector.
Supply Output 5 x 240V
200mA outputs
Housing ULV0 ABS
Weight 50g
Climate Range Temperature +2C to +40C
Humidity +5% - 90% non condensing
Cable Type UTP CAT5e or CAT6
Terminals Type 8 way Krone punch down RJ11 - Socket (lead included)
Standards Emissions - EN61000-6-3 : 2001
Immunity - EN61000-6-1 : 2001
Communication Rakom wired network
Memory Flash memory (non volatile)

DESCRIPTION
The WAVMI is fitted with 5 sets of screw terminals to provide both a 240V L,N +E supply as well as accepting in a 240V switched line simplifying wiring to devices such as PIRs. The return switched line then acts as an input on the Rako Rakom wired network in a similar way to pressing a button on a keypad. As per a keypad message, a trigger from the WAVMI can recall a direct lighting scene or be mapped to start a macro event in a WTC-Bridge.

Connection to the Rakom wired network can be via the RJ11 lead, plugging into a RAKLink or RAKStar unit. Alternatively a WPCon or WPConC unit can be used as a remote plug in connection.

Additional

Additional Information

Manufacturer Rako

Support

-