RBH-URC-2008 - RBH Elevator Controller of 8 floor expandable to 32 floor includes Enclosure with 13.8VDC, 2A power supply

RBH Access SKU: RBH-URC-2008

$1,199.00 NZD

Shipping calculated at checkout

Item is available to order. Please note the estimated delivery times below (If not displayed please contact us). Please call to pre-arrange any pick-ups.

Please Note: Estimated delivery details below

The URC-2008 Elevator Universal Reader Controller allows control of two elevator cabs with 8 floors total. It utilizes flash firmware for easy upgrades, and employs fully distributed intelligence for off-line operations. Decisions such as access level changes, schedule activation and card expiration are made by the URC-2008 controller without the need of a computer.

The panel contains on-board clock and memory backup as well as thermal overload protection. URC-2008 supports fully supervised communication via RS-485 and TCP/IP with selectable communication speed up to 56.6Kbps.

Connect to the Integra32 Server PC via LIF-200 TCP/IP Gateway or directly via a USB/RS485 converter, for a total of up to 16 panels per controller network.

Each URC-2008 Elevator Universal Reader Controller has a capacity of storing 3,000 unique 10 digit card numbers, 10 unique site codes and 3,000 off line transactions in its event buffer. In addition Each URC-2008 Elevator Universal Reader Controller can simultaneously read up to 5 distinct Wiegand or Clock & Data card formats.

The URC-2008 has 8 fully programmable elevator control dry contact outputs (SPDT 2A @ 30VDC) each with individual LED status display. The URC-2008 can be expanded to control up to 32 floors total by adding up to three additional ELEV8 boards (each ELEV8 board has 8 fully programmable elevator control SPDT dry contact outputs rated at 2A @ 30VDC each with individual LED status display).

In addition it has 4 fully programmable four state monitoring, NO / NC supervised inputs & 4 fully programmable Fail Safe / Fail secure outputs (2 x 5A @ 30VDC SPDT dry contacts and 2 x 12VDC 100mA electronic drivers).

The URC-2008 Elevator Universal Reader Controller includes a lockable metal enclosure and a built in 2A 12VDC power supply.

 

Controller Reference

RBH-URC-2008

Panels per Network

16

Local PC & Remote

Connections

Supervised RS485 via TCP/IP Ethernet, USB and Serial Ports

Communication Between

Controllers

Supervised RS-485

Speed : Programmable 9.6-56 Kbps

Distance : 4,000ft (1,200m)

Cable Type : 18AWG, 2 conductor, twisted, stranded. shielded

Cards per Panel

3,000 (up to ten digit card numbers)

Access Levels per Panel

3,000 (one per card per panel)

Site Codes per Panel

10 (site code programming is not mandatory)

Offline Transactions Buffer

3,000 FIFO, command, and alarm priority

Access Points (Readers/

Keypads)

2 with LED and Buzzer control

Distance: Max 500 ft (150 m)

Cable Type: 20 - 22 AWG, 6 or 8 conductor, stranded, shielded

Simultaneous Card Formats per Panel

5, All Wiegand compatible readers supported

Programmable Supervised Inputs :

4

Input Supervision: Four state monitoring (1 or

2 resistors)

Distance: Max 1,000ft (300m)

Cable Type: 20 - 22AWG, 2 conductor

Programmable Outputs

2 SPDT 2A @ 30 VDC, dry contacts

2 Electronic drivers, 12 VDC max, 100 mA

Output mode: Programmable Fail Safe/Fail

Secure

Power Requirements

16.5VAC, 40VA transformer (not included)

Recommended Back-up

Battery

12V, 7AH lead acid or gel cell (not included)

URC-ELV8-B Elevator Control

Outputs

8 SPDT 2A @ 30 VDC, dry contacts LED staus display for each output

Max URC-ELV8-B modules per

URC2008-B

4

URC-ELV8-B Interconnect

4 Conductor, 18 AWG Shielded

URC-ELV8-B boards per

ENCL1 enclosure

2 (1 if installed with URC-2008-B)

URC-ELV8-B Fire alarm Input

12 VDC


 

alliance wholesale prduct range

Newsletter

Sign up to receive the latest information