OPT-BXS-RAM - Optex - Boundary Outdoor PIR Detector with active IR anti-masking

OPT-BXS-RAM - Optex - Boundary Outdoor PIR Detector with active IR anti-masking

Optex SKU: OPT-BXS-RAM

$426.00 NZD

Shipping calculated at checkout

Item is available to order. Please note the estimated delivery times below (If not displayed please contact us). Please call to pre-arrange any pick-ups.

Please Note: Estimated delivery details below

Features Specs

BXS-RAM[Battery operated model with active IR anti-masking]

Features

  • 4 PIR technology
  • 24 m (80 ft.) 12 m (40 ft.) on each side adjustable to 5 ranges (2.5 m, 3.5 m, 6.0 m, 8.5 m, 12.0 m)
  • Individual detection area and sensitivity setting
  • Extreme high detection mode
  • SMDA logic for advanced temperature compensation
  • Individual signal outputs (right / left)
  • Double conductive shielding against bright light disturbance
  • Back tamper
  • Automatic walk test mode

Color variations

4 PIR technology


The detection range, sensitivity, alarm output can be set separately for the left and right detection areas. The sensor can differentiate between large and small objects within the detection area, reducing false activation and ensuring genuine intruder detection.

Individual detection area and sensitivity setting


Left and right detection ranges can be independently adjusted. ( 2.5 to 12 m in 5 steps )

Extreme high detection mode


For environments where the temperature difference between the human body and the background is very small, the extreme high detection mode increases the PIR sensitivity to avoid any missed alarm.

IR digital anti-masking function


Active IR anti-masking detects when the lens surface has been covered, blocked or painted.

AND logic function to reduce false alarms


The BX SHIELD only triggers an alarm signal when both upper and lower detection areas detect movement.

Double conductive shielding


By using our double conductive shielding, the visible light disturbance and RFI can be blocked.

SMDA (Super Multi Dimension Analysis) logic


By analyzing detection patterns and environmental information, SMDA improves immunity against various noise factors such as climate changes and vegetation sways, and can distinguish between the cause of nuisance false alarms and genuine intrusions.

Blue touch


All accessible parts are colored in blue, making an installation a more friendly procedure.

Level indicator


The BX SHIELD series features a level indicator to ease the installation process.

Back tamper


Trouble output activates when face cover, chassis as well as back box is removed.

Versatile design

 

Coverage

 

 

 

Model BXS-ST BXS-AM BXS-R BXS-RAM
Detection method Passive infrared
Coverage 24 m (80') : 12 m (40') on each side,
4 zones : 2 zones on each side, 180°narrow
PIR distance limit list the possible range 2.5, 3.5, 6, 8.5, 12 m 2.5 to 12 m (5 levels)
Detection angle from wall to Wall : 0°, away Wall : 3°, selectable
Detectable speed 0.3 to 2.0 m/s (1' to 6'7/s)
Sensitivity Normal : 2.0°C (3.6°F) at 0.6 m/s
Extreme high : 1.0°C(1.8°F)at 0.6 m/s
selectable for each side individually
Power input 9.5 to 18 VDC 3 to 9 VDC Lithium or Alkaline batteries
Current draw (except walk test) 31 mA max. at 12 VDC 34 mA max. at 12 VDC 15 μA stand-by / 8 mA max. at 3 VDC 16 μA stand-by / 8 mA max. at 3 VDC
Alarm period 2.0 ±1 sec.
Warm-up period 60 sec. or less (LED blinks)
Alarm output (R) 28 VDC 0.1 A max.,(Idividual : Right or General], (NO. or N.C.) re selectable Solid State switch, 10 VDC 0.01 A max.,(Individual : Right or General) (N.O. or N.C.) are selectable
Alarm output (L) 28 VDC 0.1 A max.,(Idividual : Left or General], (NO. or N.C.) re selectable Solid State switch, 10 VDC 0.01 A max.,(Individual : Left or General) (N.O. or N.C.) are selectable
Trouble output - N.C. 28 VDC 0.1 A max. Solid State switch, 10 VDC 0.01 A max. (N.O. or N.C.) is selectable
Tamper output N.C. 28 VDC 0.1 A max. open when face cover, main unit or base unit is removed Tamper output is shared with trouble output.
LED indicator Red LED : 1. Warm-up 2. Alarm (DIP switch ON or Walk test) Red LED :1. Warm-up 2. Alarm 3. Masking detection (DIP switch ON or Walk test) Red LED : 1. Warm-up 2. Alarm (DIP switch ON or Walk test) Red LED : 1. Warm-up 2. Alarm , 3. Masking detection (DIP switch ON or Walk test)
Operating temperature -30°C to + 60°C (-22°F to +140°F)
Environment humidity 95% max.
Operating temperature -30°C to + 60°C (-22°F to +140°F)
International protection IP55
Mounting Wall, Pole (Outdoor, Indoor)
Mounting height 0.8 to 1.2 m (2'7" to 4')
Weight 430 g (15.2 oz.) 550 g (19.4 oz.)
Accessories Screw (4 x 20 mm) x 2 [1] Connector for POWER and ALARM (R), [2] Connector for ALARM (L), [3] Connector for TROUBLE, [4] Velcro tape, [5] Screw (4x20 mm) x 2

＊ Specifications and design are subject to change without prior notice.

alliance wholesale prduct range

Newsletter

Sign up to receive the latest information