LKV686MATRIX - HDbitT HDMI Video Matrix Unit Over IP CAT5/5e/6 Network Cable - TX or RX

LENKENG SKU: LKV686MATRIX-KIT

$519.00 NZD

Shipping calculated at checkout

Item is available to order. Please note the estimated delivery times below (If not displayed please contact us). Please call to pre-arrange any pick-ups.

Please Note: Estimated delivery details below

Includes: 

  • Apply advanced over IP Technology
  • Resolution Supported is up to 4K x 2K 30Hz Ultra HD
  • Transmission distance is up to 120 metres via CAT6
  • Support IR Passback function to control source device from RX Location.
  • Plug and Play.
  • Support Scalable and flexible input-output matrix configuration allows 100 inputs to infinite output.
  • support computer control software to select and switch source device input.
  • Support to select and switch source device input from the receiver via remote control and hard button.
  • Surge protection, Lighting Protection, ESD Protection.


LENKENG HDbitT HDMI Video Matrix Transmitter Unit Over IP CAT5/5e/6 Network Cable. Supports up to 120m 4K@30Hz. Multi Cast Many to Many Matrix Connection. IR Control. Rx Unit - LKV686MATRIX-RX

This HDbitT HDMI video matrix over IP includes a transmitter unit(TX) and a receiver unit(RX). It allows for the distribution and switching of high definition video/audio signal by this product and off-the-shelf IGMP switch. It applied advanced HDbitT technology, the resolution supported is up to 4Kx2K@30Hz ultra HD. It can also be used in a point-to-point connection, the distance is up to 120 metres. It is widely applied in digital signage advertisements, control rooms, command centres, entertainment and exhibition centre, safety monitoring system, etc.

 

Part No. LKV683Matrix
Technical Transmitter-TX Receiver-RX
HDMI compliance HDMI1.4
HDCP compliance HDCP1.4
Transport protocol HDbitT
Network bandwidth 28Mbps
Video support 480i@60Hz480p@60Hz576i@50Hz576p@50Hz
720p@50/60Hz
1080i@50/60Hz1080p@50/60Hz4K×2K@24/25/30HZ
Audio support PCM
Input TMDS signal 0.7~1.2Vp-p
Input DC signal 5Vp-p
IR passback yes
IR frequency RangeKHz 20-60KHz
Network switch required with IGMP function
Input port 1×HDMI 1×RJ45, 1×3.5mm(IR)
Output port 1×RJ45, 1×3.5mm(IR) 1×HDMI
HDMI source control Support IR pass back function to control source device from RX location.
Support to select and switch source device input from receiver via remote control and hard button 
Support computer control software to select and switch source device input.
Max. input support up to 99 transmitters
LED Segment Displays CHANNEL number CHANNEL number RX ID
HDMI connector Type A 19 Pins,Female
RJ-45 connector RJ-45
Mechanical Transmitter-TX Receiver-RX
Housing  Metal enclosure
Dimensions(L×W×H mm) 164×107.6×23.6mm
Fixedness wall-mounting kits with screws
Power supply 5V2A
Power consumption 6W 5W
Operation temperature 0~60
Storage temperature —2070
Relative humidity 095%(no condensation)


 

PDFs

 

alliance wholesale prduct range

Newsletter

Sign up to receive the latest information