PLR-2012-KIT - CTS PoE Long Reach Extender. 1Km RJ45 PoE and Data Extender

cts SKU: PLR-2012-KIT

Item is available to order. Please note the estimated delivery times below (If not displayed please contact us). Please call to pre-arrange any pick-ups.

Please Note: Estimated delivery details below


  • 1km PoE+ Data Extender- Transmits data and injector power simultaneously over UTP cable up to 1km
  • Provides Power Source for Remote Side- Supports standard IEEE 802.3af/at PoE output to remote 802.3af/at PD
  • Point-to-point PoE Long Reach Solution:
    – PLR-2012-TX: 1-port PoEPD to 1-port PLR Injector
    – PLR-2012-RX: 1-port PLR Extender to 1-port PoE PSE
  • 7-Segment Digital LED displays current PoE output and diagnostic ID
  • Dual Power Input Design- IEEE 802.3af/at PoE& 60W PoE++ or 54V~57V DC
  • DIN-rail or Wall Mounting Installation Methods

CTS PoE Long Reach Extender. 1Km RJ45 PoE & Data Extender. 7-segment Digital Display. Dual Power Input. RJ-45 Point-to-point (LRP Port to TP Port).

Connection Technology Systems (CTS) PLR-2012 PoE long reach extender is the best solution that could extend your PoE up to 1km and allows you to deploy surveillance IP cam or WiFi AP to the location where power cannot be easily accessed.

CTS PLR-2012 is fully compliant with IEEE 802.3, 802.3u, 802.3af and 802.3at standards. It also allows you to retrieve power from either a PoE switch or a DC power supply, depending on the deployment environment, providing maximum flexibility.

The operation status can be monitored through a set of diagnostic LED indicators on the front panel. In addition, a 7-segment digital LED display will demonstrate the current output wattage and also codes for any abnormality that is taking place, making on-site technical support so much easier. Both the modules can be installed on a DIN-rail or onto a wall.

LRP Port (Type) 1x 10/100Mbps (RJ45 with long reach PoE)
TP Port (Type) 1x 10/100Mbps (RJ45 with PoE)
Power over Ethernet   PLR-2012-TX: 1x 60W PoE++ Input (Compatible with 802.3af/at)
PLR-2012-RX: 1x IEEE 802.3af/at Output
Standards IEEE802.310Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet PLUS
H/W Specification Auto-Cross Over for MDI/MDIX
Full/Half Duplex Mode Operation
LED Link/Act, Speed, Status, Warning, Error,
7-segment Digital Display
Forward/Filter Rate 10M: 14,880/14,880pps
100M: 148,800/148,800pps
Ethernet Feature -DIP Switch
Auto speed/Link speed/PSE mode
Power Requirement 
DC Power Input 54V~57V DC

PoE Input
IEEE 802.3af/at and 60W PoE++
Power Consumption 2.5W
Environmental Condition 
Operation 0˚C~60˚C
Storage Temperature -20˚C~60˚C
Humidity 5%~90%, Non-condensing
Dimensions (W x D x H) 60x120x32 mm 
Weight 0.29
EMC/Safety FCC Class A, CE
alliance wholesale prduct range


Sign up to receive the latest information